• Demo Image

Lubrication Systems

The innovative lubricant supply for your machine
Adequate lubrication is necessary to ensure maintain the precision of the drive system over the years. Manual lubrication is often unreliable and very expensive, especially in areas that are difficult to access. Central lubrication ensures that the right amount of lubricant supplies the system with the necessary lubricant at the right time.

By using our electronically controlled lubrication systems, the dosing quantity of the lubricant can be individually adjusted to the respective application. In conjunction with our felt gears, our lubrication systems ensure that there is a permanent, thin lubricating film on the tooth flanks. This prevents metal-to-metal contact, which would damage the teeth and thus the entire rack and pinion drive.

Whether single-point or multi-point lubrication, you increase the performance of your machines and systems with a permanent and controlled supply of the drive with the necessary lubricant.

Type 125 & Type 475

  • precise, reliable delivery of lubricant
  • battery operation
  • emptying time 1-18 months
  • synchronization with the machine operating time possible
  • visual check of level possible at all times
  • connection of hose line possible*
  • special fillings available
  • delivery of oils and greases up to NLGI-cl. 1
  • Atex possible (II 2G Ex ib IIC T4 / T3 Gb)
 

NEW Type M60/M150 & M250

  • precise, reliable delivery of lubricant
  • battery operation,voltage supply 24V
  • delivery pressure max. 7.5 bar (109 psi)
  • emptying time 1-12 months
  • operating temperature -20 °C to +60 °C
  • visual warning of malfunction (LED)
  • visual inspection of the fill level possible at any time
  • flow rate independent of temperature
  • connection of hose line possible*
  • delivery of oils and greases up to NLGI-cl. 2
  • can be used outdoors
  • special fillings available

NEW Type MD125

  • precise, reliable delivery of lubricant
  • battery operation,voltage supply 24V
    or connection to machine control system
  • delivery pressure 15-35/50 bar (174 - 508/725 psi) depending on design
  • emptying time 1-24 months
  • synchronization with the machine operating time possible
  • operating temperature -15 °C to +60 °C
  • visual warning of malfunction (LED and display)
  • visual inspection of the fill level possible at any time
  • vacancy report
  • flow rate independent of temperature
  • connection of hose line possible*
  • delivery of oils and greases up to NLGI-cl. 2
  • compact dimensions
  • special fillings available
  • adaptable to splitter / distributor
 

NEW Type MD400

  • precise, reliable delivery of lubricant
  • battery operation,voltage supply 24V
    or connection to machine control system
  • delivery pressure up to 70 bar (1015 psi)
  • dispensing period 1-36 months
  • synchronization with the machine operating time possible
  • operating temperature -15 °C to +70 °C
  • visual warning of malfunction (LED and display)
  • vacancy report
  • flow rate independent of temperature
  • visual inspection of the fill level possible at any time
  • connection of hose line possible*
  • delivery of oils and greases up to NLGI-cl. 2
  • special fillings available
  • adaptable to splitter / distributor

PDF Catalogue Lubrication Systems

Lubricants

More about Lubricants
 

Accessories

More about Accessories