HP-High Perfomance Servo Worm Gearboxes
ATLANTA HP-High Performance Servo Worm Gearboxes have been specially developed for use with the latest three-phase and DC servo-motors.
The following are typical features of our HP-Servo Worm Gearboxes:
- Backlash: <2 arcmin, adjustable
- 5 sizes: centre distance 50, 63, 80, 100 and 125mm
- 8 ratios: 4.75; 6.75; 9.25; 14.5; 19.5; 29; 39; 50 and 52:1
- Output torque: from 60 to 2200 Nm
- Output hollow shaft:
- key connection
- clamp connection
generously dimensioned and supported for high additional forces
- Very high rigidity
- Very high precision
- ATEX design available
Selection and Load Tables
Calculation and Selection of Servo Worm Gearboxes
With his PDF file you can subject the corresponding ATLANTA Servo Worm Gearbox for your application.
Should you require technical support or do you have some questions, use the following contact form
Transcode-Tool HT Servo Worm Gearbox
For the new HT Servo Worm Gearboxes with modular motor flange new part numbers have been created, which can be found in our catalog Servo Worm Gearboxes. In the future an order consists of the order number for the gearbox as basic unit and additionally of the order number for the corresponding motor flange.
For transcode the old article number in the new numbers for the gearbox and the corresponding motor flange, we created a Transcode-Tool, which can be found below. To receive the new order number for the servo worm gearbox as basic unit and the new order number of the corresponding motor flange, you only need to enter the known old order number of the complete servo worm gearbox. If an intermediate flange is needed, the corresponding order number will be shown as well.
Old order number HP Servo Worm Gearbox: (e.g. 5883107)
Order number for New Servo Worm Gearbox and Motor Flange:
New order number of gearbox:
New order number of motor flange:
If needed, order number of intermediate flange :