HP-High Perfomance Servo Worm Gear Units

PDF Catalogue HP-Servo

ATLANTA HP-High Performance Servo Worm Gear Units have been specially developed for use with the latest three-phase and DC servo-motors.


The following are typical features of our HP-Servo Gear Units:

  • Backlash: <2 arcmin, adjustable
  • 5 sizes: centre distance 50, 63, 80, 100 and 125mm
  • 8 ratios: 4.75; 6.75; 9.25; 14.5; 19.5; 29; 39; 50 and 52:1
  • Output torque: from 60 to 2200 Nm
  • Output hollow shaft:
      • key connection
      • clamp connection
    generously dimensioned and supported for high additional forces
  • Very high rigidity
  • Very high precision
  • ATEX design available

  • Selection and Load Tables

    Size
    a    		Ratio   
    i    		T2max.Output torque Nm at driving speed
    500 min-11000 min-11500 min-13000 min-14000 min-15000 min-1
    50 mm4.75550657070706561
    6.75400566369696561
    9.25275485458707065
    14.50350576570757575
    19.50250455055656565
    29.00300485560707065
    39.00200536065757575
    50.00150424750606060
    63 mm4.751000170180170145135 
    6.75750170180170145135
    9.25500115130135135126
    14.50600165180180170160
    19.50500115130135165155
    29.00650175205220195185
    39.00450140160175190190
    52.0030095115125150160
    80 mm4.752000420360330280 
    6.751400420360330280
    9.251100370360330280
    14.501300450420370295
    19.501000370400380320
    29.001200520530490420
    39.00850430490480410
    52.00600240275300330
    100 mm4.753300880750685580 
    6.752300830720660580
    9.251900830720660580
    14.502050930810720620
    19.501800900810720620
    29.00230011501010850800
    39.00165010801000900780
    52.001100760850785680
    125mm6.7564501650140013001150* 
    9.2544001600135012001050
    14.5058501800175015001300
    19.5039001750150014001200
    29.0057002200195018001550
    39.0038002100185017001500
    52.0025001800160015001300


    *max. input speed of 2800 min-1

  • Calculation and Selection of Gear Units

    With his PDF file you can subject the corresponding ATLANTA Servo Gear Unit for your application. 
    Should you require technical support or do you have some questions, use the following contact form

    PDF_icon  PDF Download

     

  • Document Download


  • Traceparts

    Access CAD Drawings ATLANTA HP-High Performance Servo Worm Gear Units

  • Transcode-Tool HP Servo Gearbox

    For the new HP servo worm gearboxes with modular motor flange new part numbers have been created, which can be found in our catalog Servo Drive Systems. In the future an order consists of the order number for the gearbox as basic unit and additionally of the order number for the corresponding motor flange.

    For transcode the old article number in the new numbers for the gearbox and the corresponding motor flange, we created a Transcode-Tool, which can be found below. To receive the new order number for the servo gearbox as basic unit and the new order number of the corresponding motor flange, you only need to enter the known old order number of the complete gearbox unit. If an intermediate flange is needed, the corresponding order number will be shown as well

    Transcode-Tool

    Old order number HP Servo Gearbox: (e.g. 5883107)

    Gearbox Information:
    Size:
    Ratio:
    Output connection:

     

    Order number for new gearbox and motor flange:
    New order number of gearbox:
    New order number of motor flange:
    If needed, order number of intermediate flange :