The single-point lubrication system type 125 and type 475 is an electronically controlled lubricater which is based on the grease gun principle. After starting the operation, a nitrogen gas is generated electronically to move a piston.

Typee 125 / 475 long-term use
The grease filling by the type 125 and 475 is pressed out evenly (not pulsating) at constant pressure according to the selected dosage. Depending on requirements, a emptying time of 1-18 months can be selected for a grease filling via microswitches.
The transparent housing, which can be mounted in any position, allows a visual check of the amount of grease still available at any time. After complete emptying, further use is possible by refilling.

The advantages of Type 125 and Type 475

  • precise, reliable delivery of lubricant
  • battery operation
  • emptying time 1-18 months
  • synchronization with the machine operating time possible
  • visual check of level possible at all times
  • connection of hose line possible*
  • special fillings available
  • delivery of oils and greases up to NLGI-cl. 1
  • Atex possible (II 2G Ex ib IIC T4 / T3 Gb)

  • Bestandteile_Typ125_475

  • ModelType 125Type 475
     without ATEXwith ATEXwithout ATEXwith ATEX
    DriveNitrogen pressure chamber
    Operating pressureca. 0,2 - 3,0 bar
    Settings1 - 18 month
    Time or pulse controltime mode
    Lubrication volume100 ml460 ml
    Lubricating mediumoils and greases up to NLGI 1
    Temperature range-30ºC to +50ºC
    Operating voltage3,0 V battery supply
    Weight empty420 g600 g
    Dimensions H x Ø10,0 x 8,0 cm15,0 x 11,5 cm
    OutletG1/4G1/8G1/2G1/4
    Performance monitoringLED red / green

  • Lubrication quantities

    The following tables show the lubrication quantities of the respective lubrication systems.

    Lubricant / day (ml)

    Donation cycle
    (every x hours)

    Lubricant
    per cycle (ml)

    Selection
    month
    DIP-switch
    Type 125Type 475
    4,0014,00Permanent11+7
    2,107,5022+7
    1,304,5033+7
    0,702,5064+7
    0,351,20125+7
    0,1750,60186+7

  • Inbetriebnahme- und Wartungsanleitung

    BWL 400 - HS Hochleistungs-Spindelhubgetriebe

    PDF_icon  Deutsch     PDF_icon  Englisch

    Safety data sheet

    PDF_icon  Deutsch     PDF_icon  Englisch

  • CAD Files

Here you will find the lubricants, recommended by us for a reliable and efficient function of the lubrication systems.

More about lubricants