• Demo Image

Lubrication Systems

Adequate lubrication is necessary to ensure consistent precision of the drive systems over the years. Manual lubrication is often unreliable and very expensive. The flexible and user-friendly ATLANTA lubrication systems are used in almost all areas of drive technology worldwide. The dosing quantity can be individually adjusted to the respective application and in combination with our felt gears ensures that a permanent thin lubricating film is present on the tooth flanks. This prevents a metal-to-metal contact, which leads to damage to the teeth and thus to the entire rack-and-pinion drive. This ensures a permanent and controlled lubrication of your drive system.

Type 125 & Type 475

  • precise, reliable delivery of lubricant
  • battery operation
  • emptying time 1-18 months
  • synchronization with the machine operating time possible
  • visual check of level possible at all times
  • connection of hose line possible*
  • special fillings available
  • delivery of oils and greases up to NLGI-cl. 1
  • Atex possible (II 2G Ex ib IIC T4 / T3 Gb)
 

Type M60 / M150 & M250

  • precise, reliable delivery of lubricant
  • battery operation,voltage supply 24V
  • delivery pressure max. 7.5 bar (109 psi)
  • emptying time 1-12 months
  • operating temperature -20 °C to +60 °C
  • visual warning of malfunction (LED)
  • visual inspection of the fill level possible at any time
  • flow rate independent of temperature
  • connection of hose line possible*
  • delivery of oils and greases up to NLGI-cl. 2
  • can be used outdoors
  • special fillings available

Type MD125

  • precise, reliable delivery of lubricant
  • battery operation,voltage supply 24V
    or connection to machine control system
  • delivery pressure 15-35/50 bar (174 - 508/725 psi) depending on design
  • emptying time 1-24 months
  • synchronization with the machine operating time possible
  • operating temperature -15 °C to +60 °C
  • visual warning of malfunction (LED and display)
  • visual inspection of the fill level possible at any time
  • vacancy report
  • flow rate independent of temperature
  • connection of hose line possible*
  • delivery of oils and greases up to NLGI-cl. 2
  • compact dimensions
  • special fillings available
  • adaptable to splitter / distributor
 

Type MD400

  • precise, reliable delivery of lubricant
  • battery operation,voltage supply 24V
    or connection to machine control system
  • delivery pressure up to 70 bar (1015 psi)
  • dispensing period 1-36 months
  • synchronization with the machine operating time possible
  • operating temperature -15 °C to +70 °C
  • visual warning of malfunction (LED and display)
  • vacancy report
  • flow rate independent of temperature
  • visual inspection of the fill level possible at any time
  • connection of hose line possible*
  • delivery of oils and greases up to NLGI-cl. 2
  • special fillings available
  • adaptable to splitter / distributor