Cylindrical Worm Gear Drives
- 6 sizes: 40, 50, 60, 80, 100 and 125mm
- 14 ratios: 6,75; 9; 12; 14,50; 19; 26; 29; 39; 51;
53; 61; 62; 82 und 109:1 - worm flanks ground, steel hardened, shaft ends soft
- worm gears of cpecial worm-gear bronze
- tooth profile: K DIN 3975/76
- gearing grade: 7fs" analog DIN 3963 / DIN 3967
- right-hand
Download PDF
Straight-Tooth Bevel Gears
- material: heat-treatable steel Cf 53 W.St.Nr.1.1213
- quality 8 e 25 DIN 3965,
- module 1 to 5
- 8 ratios: 1; 1,5; 2; 2,5; 3; 3,5; 4 and 5:1
- 90° shaft angle
Download PDF
Splined Shafts and Hubs
- Splined shafts and toothed shafts DIN 9611 and DIN 5463 with solid shaft end, milled, unhardened, material: heat-treatable steel C 35K, mat. no. 1.0501 DIN dimensions: 6x11x14 bis 38x1,25x29
- Splined shafts and toothed shafts, profile bars DIN 9611 and DIN 5463 material: heat-treatable steel C45, mat.no. 1.0503, unhardened DIN dimensions: 6x11x14 to 38x1,25x29, length 250 to 4000mm
- Mounting hubs with broached internal profile DIN 9611, 5463, 5480 material: heat-treatable steel C45, WSt.-Nr. 1.0501, unhardened
- Sleeves with broached internal profile DIN 9611, 5463, 5480 material: heat-treatable steel 16MnCr5, WSt.Nr. 1.7131, unhardened
Download PDF
Precision Spindle Drives
- Trapezoidal-thread spindles acc. DIN 103
- Precision-rolled, single-thread, tolerance field 7e
- Sizes: Tr 12x3 to Tr 70x10 right and left hand
- Material C15 stress-relieved, material no. 1.0401
- Flange nut also in heavy-duty running design
- Round and hexagon trapezoidal-thread nuts
- Ball-screw spindle, rolled, right-hand
material Cf 53 (1.1213), induction-hardened to 60±2 HRC
both shaft ends soft-annealed for finish treatment - Flange and nuts for ball-screw spindles
Download PDF
